Power unit and remote control + power cable - 9995671+99954226+58984401LF
*Please note that although we keep a very large stock of products, the range of spare parts for all 240+ Dolphin Robot models is extensive and certain items may not be available for immediate despatch. In this case, orders are usually processed within 2 days*
Maytronics Dolphin Digital Transformer 220-230V / 29V DC + Digital remote control for your Dolphin cleaner. Output 180W.
Double insulation with thermal protection switch.
Prevents and protects the cleaner robot in case of sudden changes or power failures.
12 MONTHS WARRANTY
Power cable included
Full filter bag indicatorThe power supply is equipped with a filter bag status indicator.The red LED indicates two filter conditions:
LED blinking: The filter is partially blocked.
LED lighted: The filter is blocked and must be emptied and cleaned.
If the LED does not turn off after the filter had been emptied and cleaned, press the RESET button while the robot is working.
The Remote Control Unit (RCU) offers two operation modes: Automatic mode and Manual direction mode.In Automatic cleaning mode, In automatic mode, the cleaning parameters can be changed.In Manual direction mode, the robots motion can be controlled manually.
Manual Direction Control Mode
Press the On/Off button once. The remote control will start in manual direction control mode;
Use the direction control arrows to control the movement of the robot around the pool;
To exit the manual direction control mode, press the Manual/Automatic select button once only.
Setting the Automatic Mode
To Change the Automatic Mode settings First press the Manual/Automatic select button, then set according to the following table:
Note:
When choosing the fast cleaning cycle the pool cleaner will not climb walls;
After 2 minute if no button is pressed, the Remote Control Unit will shut-down and the Pool cleaner will continue to work in the previous settings;
When the "Ultra-Clean" and "Walls Only" options finish their cycles, the Pool Cleaner will return to default settings.